PRE-SEASON LOT OF 5 75 HL AUTOCLAVES 
RESERVATIONS WHILE STOCKS LAST - THE PRICE IS EACH

DIMENSIONS:
External diameter: ~1650 mm (D) + (200 mm insulation) = 1850 mm external
Cylindrical part height: ~3000 mm (HF)
H legs: ~700 mm (HG)

MATERIALS:
Shell: AISI 304 stainless steel
Bottom: AISI 304 convex stainless steel
Roof: AISI 304 convex stainless steel

SURFACES FINISHING:
Tank interior: 2B shell (polished from the rolling mill) Roof and bottom with fine satin finish
These finishes are guaranteed with adhesive plastic film protection before starting any work.

WELDING:
The welds are carried out with an automatic and manual T.I.G. process. with inert gas protection (Argon)
on both sides of the joint, fully penetrated, pickled and washed Grinding and fine brushing of the natural beads
internal and external. Smoothing of the welds of the plating by cold rolling.

STRUCTURE:
Structure suitable to withstand the nominal capacity with a density of 1.1 kg/dm3 + overpressure according to
6 BAR approval according to 97/23/CE P.E.D. Design and certification in accordance with EN standards
ISO 13445.

COMPONENTS:
- 4 pyramidal support feet made from bent sheet metal equipped with adjustable feet with thread and plate
Ø120 for floor support.
- Lifting eyebolts applied to the roof.
- Elliptical door in P.E.D. certified AISI 304, located on the lower part of the shell with internal/external opening
- DN50 total drain with stainless steel ball valve, DIN50 connection.
- DN50 partial drain with stainless steel ball valve, DIN50 connection.
- Predisposition for DN50 mixer connection with stainless steel ball valve, DIN50 connection, inclined towards the bottom of the tank (DN50 extractable mixer excluded)
- DN50 internal replacement pipe with stainless steel ball valve, DIN50 connection
- DIN DN50 fitting complete with blind swivel on the center of the roof
- Tap takes samples with ball valve.
- Level group with stainless steel needle valve, ø 16 polycarbonate tube, steel protection, upper recess.
- Analog thermometer.
- Well for temperature probe.
- N°1 heat exchange pockets applied to the shell made in a cavity using spot welding with argon gas protection complete with inlet/outlet fittings for the carrier fluid.
- KZE system with pressure gauge and PED 6 bar approved pressure safety valve
- Insulated counter door in AISI304
- CE marking and type certificate according to European Directive 97/23/EC

Optional total insulation in double layer polyurethane panels with staggered joints th. total 100 mm, 100 mm thick injected bottoms, riveted finish in flowered AISI304 €4,200.00 - welded €7,500.00