Lot of n. 10 tanks that can also be sold individually while stocks last.
The price is for each one.

Single-wall cylindrical tank with vertical axis, with edged conical bottom made of AISI 304 stainless steel sheets, double finish 2B (smooth) of first choice, joined at the ends with
butt welds.
The cylindrical body consists of a series of ferrules of adequate thickness, calculated on the basis of the hydrostatic thrust to which the tank is subject.
The roof is of the edged conical type.
The welds will be carried out with the Tig process to protect with inert gas and Argon.
The internal and external welds will undergo a final pickling and passivation treatment, which will ensure the inalterability and stability of the steel.
The single tank will be equipped with 1 thermo-refrigerated pocket of H 1.000 mm insulated with 40 mm thick insulating plates and covered in 0.8 mm thick stainless steel sheet using tear-off rivets.

Dimensions:
- internal diameter mm. 2,500
- external diameter mm. 2,600
- cylindrical body height mm. 6,000
- conical roof elevation mm. 250
- conical bottom mm. 200
- upper manhole elevation ø 400 mm. 400
- legs height n ° 6 mm. 500
- total tank height mm. 7,000 approx.
- bottom thickness mm. 3.0 aisi 304
- 1st shell thickness h 1500 mm. 2.5 aisi 304
- thickness 2 ° -3 ° -4 ° h 1500 mm. 2.0 aisi 304
- roof thickness mm. 2.0 aisi 304

Accessories:
- N ° 1 Classic upper manhole Ø 400 in Aisi 304 in central position;
- N ° 1 2 ”PVC double-acting vent valve;
- N ° 2 ball valves DIN 65 connection, for total and partial discharge in 304 stainless steel;
- N ° 4 lifting eyebolts;
- N ° 1 Sampling tap, male ½ ”Gas connection, AISI 304 stainless steel;
- N ° 1 Level rod, complete with upper and lower level door in AISI 304 stainless steel, Æ 16 pipe in polymethacrylate and rod
adhesive metric;
- N ° 1 Lower elliptical door with internal opening in AISI 304;
- N ° 1 Thermo regulated pocket H 1000 insulated and lined;
- N ° 2 1 ”sleeves for IN / OUT refrigerant solution;
- N ° 1 Analog thermometer with stainless steel dial complete with ½ ”probe holder socket;
- N ° 1 Well for cold probe connection (well only);
- N ° 4 stainless steel adjustable plates.