Batch of no. 10 stainless steel thermoconditioned autoclaves, built with cylindrical ferrules, rounded roof and bottom, resting on feet, made according to the 2014/68 / UE PED regulations. Cod. A.I.I.T.T.R.
Horizontal and vertical joint weldings made manually and / or automatically with "TIG / PLASMA" procedures.
Material: AISI 304 stainless steel, first choice and PED certified
Internal surface finish: polished with soldered filings
Exterior surface finish: flowered
Working pressure: 6 ATM
Testing pressure: 9 ATM
Nominal capacity: Liters 5000
Dimensions:
- internal diameter 1500 mm
- external diameter 1700 mm
- plating height mm 2500
- total height mm 4000
ACCESSORIES:
- pyramid-shaped support feet, made of stainless steel sheet, welded to the tank, complete with height adjustment screw for tank leveling.
- Lifting hooks.
- N. 1 plate complete with identification data of the tank.
- N. 1 DIN 65 F connection on the roof.
- N. 1 oval door with internal opening, complete with gasket.
- N. 1 visual level complete with door-level, Plexiglass tube ø 20 mm and stainless steel protection with applied adhesive millimeter rod, with supply of specific calibration table.
- N. 1 upper return of the level tube in the shell of the tank.
- N. 1 tap takes samples DN 15.
- N. 1 total discharge with tube with RF DN 50 DIN.
- No. 1 partial discharge with RF DN 50 DIN.
- N.1 PED approved safety group composed of safety valve, pressure gauge and gas introduction valve, with 1/2 "F inlet connection.
- N. 1 connection for "sintered cartridge" (supply and installation excluded) ø3 / 8 "M / F.
- N. 1 reassembly tube culminating in the roof welding, with RF DN 50 DIN.
- N. 1 side connection with RF DN 50 DIN for extractable stirrer introduction. (supply and installation of the agitator excluded)
- N. 1 thermometer complete with stainless steel cockpit.
- N. 1 probe holder well ø1 / 2 "(excluding supply and installation of the probe)
- N. 2 "honeycomb" thermoregulation strips, h. 750/1000 mm, constructed in such a way as to avoid the formation of preferential paths of the coolant. Input connections 1 "F / output 1" F. (Test pressure 10 bar, for use up to 4 bar, normal use 1,5 bar, exchange coefficient 200 W / m2 ° C).
THERMAL INSULATION WITH RIVETEN COVERING
Thermal insulation of the cylindrical plating with rigid polyurethane foam, applied in double layer sheets, injected bottoms and legs, with a total thickness of 100 mm.
Flourished finish stainless steel sheet. Countertop stainless steel.

THE PRICE IS FOR EACH. (minimum 3pc).